The CGSULIT SC530 is a professional VW / Audi scan tool, designed to provide OE-level diagnostics with ease. Whether you're a DIY enthusiast or a professional mechanic, this tool is essential for ensuring your vehicle runs smoothly.

GSULIT SC530 VW/ Audi Scan Tool Highlights:

1.Strong Compatilibity: Works well on VW, VW_CV, Audi, and Seat? models.

2.Full System Diagnostic:Drivetrain system, Body system, Chassis system, and Electrical system. (Engine, ABS, SRS, Transmission, TPMS, Immobilizer, and more.)

3.25+ Hot Functions/Basic Service/Maintenance Services: Oil Reset, SAS, ABS, Airbag reset, EPB, TPMS Reset, Battery reset, etc.

4.Active test/Bi-directional Test: Allows you to activate or control a vehicle system or component, while protecting the health of your vehicle's equipment.

5.Supports Full 10 OBD Functions: Compatible with all vehicles that support OBD2.

6.Smart Auto-VIN Technology: Quickly and directly scans the vehicle's information, eliminating the need for manual input.?

7.Live Data Stream: Monitor real-time data from your vehicle's sensors to identify issues before they become major problems.

CGSULIT SC530 Scan Tool For VW/Audi Supports Over 25 Reset Services

?Oil?Service Reset:

SC530 VAG?scanner offers help to reset the Oil Life Reminder (turn off the Oil Service Light) when the replacement of engine oil is done in case of the impurities in oil may damage the engine. So vehicles can recalculate another optimal oil life change interval depending on the vehicle driving conditions and climate. Your driving safety also gets ensuring.

?EPB Service:

Reset the brake pad after the repairs in the electronic parking brake system is done, which includes deactivation and activation of the brake control system, bleed brake fluid, open and close brake pads, and setting brakes after disc or pad replacement. Diagnoses EPB caliper functionality, initializes the wear indicator if new pads are installed and deactivates or re-activates brake control system.

?DPF Regeneration:?

Especially works for the Diesel Particulate Filter system with DPF regeneration, letting you perform the D-P-F cleaning to clear the blockage through continuous burning of the particulates captured in the D-P-F filter. When a D-P-F regeneration cycle is completed, the DPF light automatically goes off.

?TPMS Service:

Tire Pressure Monitoring System. Programming The service allows you to check the tire sensor IDs from the vehicle ECU and to perform TPMS programming and reset after tires and/or TPM sensors are replaced and/or tires are rotated.

?Air Bag Reset(SRS):

After diagnosing on airbag system errors in the event of a crash or during regular maintenance, it promptly erases fault codes and takes corrective actions to ensure the airbag system functions normally.

?SAS Calibration:

The steering angle sensor (SAS) is a critical part of the ESC system that measures the steering wheel position angle and rate of turn. SAS is very important for the safety of the driver and the passenger alike.

?ABS Bleeding:

When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity.

?Battery Reset(BRT):

The battery light indicates a battery charging problem. If the battery light comes on and stays on while you are driving, the most common cause is a broken alternator belt.?

?More functions:

Clutch adaption, Windows/door, Immobilizer Function, Turbo, Transmission Learn, Language change, CVT, GEAR Learning,?A/F Adjust,?Seat Match,?Prime Fuel?Pump, Headlamp reset, EVAP test, Change Tire size, Tcmoil and etc.

Warm Tips:?Please note that the supported special functions will vary from specific year and model of the vehicle.

CGSULIT SC530 Bi-directional Scan Tool For VW/Audi

The SC530 OBD2 scanner lets you send commands to test vehicle components like the fuel pump, windows, doors, wipers, and air conditioning. This feature helps pinpoint faulty parts quickly, eliminating guesswork and speeding up repairs.

CGSULIT SC530 VW/Audi Scan Tool Turn Off the Warning Lights

---Read and clear the vehicle’s fault codes, turn off the MIL.

---Display I/M readiness status, check if the vehicle is ready for “S-mog Test”.

---Displays the oxygen sensor monitor and gather the test results.

---Displays freeze frame data of the fault occurred moment of the vehicle.

---Merge 4 PIDs live data in graph; Request Vehicle Information

---Request on-board monitoring test results for specific monitored systems.

---Special Control Mode requests control of the on-board system/EVAP test.

Multilingual Support:?

English, Spanish, Portuguese, German,?French, Swedish, English, Dutch, Japanese, Italian, Russian, and more languages updatable.

Lifetime FREE Update and Easily Done:

The update tool CGSULIT Assist allows you to update& uninstall software, save & print data, gaining more available vehicle models and language on the original basis free lifetime.

Note: About Compatibility

Please notice that the vehicle's special functions & vehicle compatibility will vary in different years & models.

SC530 comes with only one free scan software, but it supports installing extra software anytime. If you have more cars, you only need to purchase the software here:.

Package List:

*?CGSULIT SC530
*?Diagnostic Cable
*?USB Cable
*?User Manual
*?Warranty Card
*?Portable Nylon Pouch
* Outer Carton