You're $50 Away from Free Shipping!
When your vehicle check engine light comes on, it can be a nerve-wracking experience. For the average driver, the uncertainty and trepidation that a check engine light creates can feel like getting a bad medical diagnosis that couldn't tell you what wrong is or how to fix it. Instead of worrying, consider using the SC301 diagnostic tool with dozens of dollars to discover if you are dealing with a larger repair or something as small as a loose gas cap????:
Turn the ignition on without starting the car, plug it in, and hit enter. You never need to charge or install an SD card. It will locate the problems of your vehicle in minutes! SC301 works on all vehicles compatible with standard OBD2 protocols.
-Specially Designed for Home Diagnostics
SC301 code reader is specifically designed for car owners to identify engine system problems with their vehicles before taking them to a mechanic. Therefore, it is ideal for daily diagnosis at home.
Moreover, it will save you a lot of car diagnosis and maintenance costs, help you easily & quickly repair the fault of the emission system, find the hidden safety hazards of the engine in time, prolong the engine lifetime, and reduce fuel consumption.
-Carry-on Vehicle CEL Doctor
The SC301 mini obd2 scanner can retrieve VIN and read DTCs of your vehicle automatically, read live data streams accurately and show clearly in text and graph format data, and locate bad O2 sensors in time. One key I/M readiness for quickly checking the emission system to ensure vehicles pass the smoke check,?turning off CEL (check engine light) or MIL (Malfunction Indicator Lamp), and resetting the monitor.
?
?Supports multiple code requests: Generic, manufacturer-specific, and pending codes.
?Clears codes, turns off Check Engine Light (CEL), and resets monitors.
?DTC definition can be automatically displayed after reading, press the "HELP" button?with the DTC guide for possible causes of codes showing the small "?" icon.
?Reads freeze frame data which shows engine conditions such as fuel trim, fuel pressure, engine coolant temp, etc. at the time the MIL?(Malfunction Indicator Lamp) was set.
?Reads, records, graphs & playbacks (data logging) live sensor data.
?Reads live O2 sensor/on-board monitor test data:?Displays test results for Emission-Related power train components and systems that are available and are not available.?(Full OBD modes including Mode 6 and Mode 8)
?Component Test: This allows the code reader to control the operation of vehicle components, tests, or systems.
(Beeping: means your SC301?has diagnosed faults codes in your car. If you do not wish to hear the noise, please enter Settings to set it.)
The CGSULIT SC301 OBD2 scanner universal check engine light tool can quickly & accurately read and erase engine fault codes. It covers all OBD2 protocols and all OBD diagnostic services. Therefore, it will work with virtually any vehicle equipped with OBD2 and?view more powertrain diagnostic data than another OBD2 scan tool.
SC301?obd2 scan tool has some enhanced functions which retrieve a wealth of information from the Engine Control Unit (ECU). The ECU is what triggers the Check Engine Light when there is a problem with your car. Parts that might cause your check engine light on include:
#1. Gas Cap #2. Oxygen Sensor #3. Air Fuel Ratio Sensor #4. Mass Air Flow Sensor #5. Ignition Coils #6. Spark Plug Wires #7. Spark Plugs #8. Thermostat #9. EGR Valve #10. Evaporatative Emission Canister Purge Valve (EVAP) #11. Catalytic Converter.
How much data can be read depends on the vehicle, there are over 40 graphing live data (Download the Specification Sheet to get a whole list), to list some:
Green/Yellow/Red?LED Notifications:
I/M readiness hotkeys make it easy to use the car computer reader right out of the package, to know if you are ready for a smog check, press the I/M button(rubber) for 3 seconds.?Red-Yellow-Green LEDs and built-in speakers indicate the readiness status for a confident emissions test.
●?Green?- Indicates that engine systems are “OK” and working properly (the number of Monitors equipped with the vehicle which has run and performed their self-diagnostic testing is in the allowed range. MIL is off. ). No stored and pending DTCs exist. The vehicle is ready for an Emissions Test.?
●?Yellow?- The tool finds a possible problem. It indicates the following two conditions:?
(1)?Pending DTCs exist. Please check the I/M Readiness test result screen and use the Read Codes function to view detailed code information.?
(2)?Some of the vehicle’s emission monitors have not worked properly. If the I/M Readiness screen shows no DTC (including pending DTC), but the Yellow LED is still illuminated, it indicates a “Monitor Has Not Run” status.?
●?Red??- Indicates some problems exist with one or more of the vehicle’s systems, and the vehicle is not ready for an Emissions Test. As well there are DTCs found. The MIL lamp on the vehicle’s instrument panel will light steadily. The problem that is causing the illumination of Red LED should be fixed before an Emissions Test or driving the vehicle?
Data Log:
The SC301 auto code reader records PIDs for later use to help you diagnose intermittent driving performance problems which cannot be determined by any other methods.
DTC Help:
Press the "HELP" button with the DTC guide for possible causes of codes showing the small "?" icon.
VIN Retrieval:
Automatic VIN acquisition and decoding make it much easier to read manufacturer-specific codes and enhanced mode 6 data.
Print Data:
If you are unable to determine the problem, you can print out the diagnostic data and send the data to your mechanic for help.
Click to know?.
Package List:
* CGSULIT SC301
*?User Manual
*?USB Cable
For all orders exceeding a value of 100USD shipping is offered for free.
Returns will be accepted for up to 10 days of Customer’s receipt or tracking number on unworn items. You, as a Customer, are obliged to inform us via email before you return the item.
Otherwise, standard shipping charges apply. Check out our delivery Terms & Conditions for more details.
